Planet Technology 1-Bay Manual de usuario

1-Bay SATA NAS ServerNAS-7100 Quick Installation GuideVersion:1.0

107. After click "Save", you will see the dialog box to prompt you again. Please click “OK” to save or click “Cancel to check the se

11Using Your NAS-7100To Use the NAS storage1. Open Network Neighborhood (or My Network Places).2. Locate the NAS-7100. If it is not listed, do

12Other CongurationIf you want to set more detail settings of NAS-7100, please refer to our manual and congure with your Web Brow

Table of ContentsSystem ... 4 Package Conte

Thank you for purchasing PLANET 1-Bay SATA NAS Server, NAS-7100. In this installation guide, it illustrates the simply installation for

4SystemPackage ContentsThe following items should be included in the NAS65 packaging.If any of these items are damaged or missing, please co

5HDD Install/RemoveThe NAS-7100 supports one 3.5-inch Serial-ATA (SATA) hard drive. NAS-7100 does not support low prole or half high hard drive.HDD I

6System InstallationBoot up1. Connect the network cable to LAN port on the rear of NAS-7100. Connect the others end to your hub or switch

7Conguration• This procedure only needs to be done ONCE, by the NAS-7100’s Administrator.• Other LAN users should follow the advice given i

8A list of all the NAS-7100s on your network will show on the left side. The right side displays details of the currently selected NAS

95. You can congure the time settings in this screen. Please click “Next” after the congured.Server NameThe Default Name is shown. You