Planet Technology DVR-470 Manual de usuario

4/16-Channel H.264 Digital Video Recorder DVR-470 DVR-1670 USER’S MANUAL

External Alarm Input 4/8/16 Alarm in. Relay Output 2/4 Alarm out 8 AC Input 100V~240VAC 2.4 External Alarm In/Out Connection Alarm input port： G (

Chapter3 Operational Instructions 3.1 Front Panel n o

REC PTZ PREV A SHIFT 1. Manual record; 2. 【SHOT】in PTZ control (adjust preset). 1. Enter into PTZ control mode; 2. 【IRIS-】in PTZ co

3.2 IR Controller Index Name Description 1 POWER Turnoff device. 2 DEV Enable/Disable IR remote control 3 Numeric Keys Same as numeric keys of

15 Reserved 16 F1 Same as【F1】key of front panel. 17 Lens control IRIS, FOCUS ZOOM for lens control. 18 F2 Same as【F2】key of front panel. Loading

3.3 Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Display Unit name Device ID Require password Screen saver Video standard B

Transaction Text input mode ATM IP address ATM type Text information Utilities Restore parameters Upgrade firmware HDD management Clear alarm output

Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “A

3.4 Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the in

Chapter4 Basic Operation Guide 4.1 Power on Note：Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on,

Copyright Copyright © 2007 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s

Camera record status is following： Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green R

Camera alarm status is following： Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&am

4.3 User name and password Note：When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. T

Setp 2：Enter into password modification menu Move the “Active Frame” to “Password” icon by using【Æ】/【Å】keys. Press【ENTER】key to enter into following

4.4 PTZ Control Note：The user must have the “PTZ control” right. PTZ control interface In preview mode, press【PTZ】key, in the login dialog, select one

Adjust preset description In PTZ control mode, press【REC/SHOT】key, and press the preset number (three numeric keys), DVR will adjust the corresponding

4.5 Manual Record Note：The user must have the corresponding right, DVR has HDD and HDD is formatted already. Manual record In preview mode, press【R

4.6 Playback Note：The user must have “Playback” right. Playback interface In preview mode, press【PLAY】key, in the pop-up login dialog, select userna

Play by Time：Playback the recorded stream directly based on the time section. Select Page：In the file list box, each page will only display 8 files.

3. Search by Card No and Playback file：In the playback interface, select channel number, record type, enable card No. search option (“9”) and input th

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled

Exit playback In playback interface, press【ESC】key to enter into preview mode. In playback interface, press【MENU】key to enter into main menu, press【RE

4.7 Backup Recorded Files Note：The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback

Step 2：Select the files that you want to backup In the file list box, use【↑】or【↓】keys to move the scroll bar. When the scroll bar stays at the file yo

4.8 Shut Down DVR Note：Do not switch off the power directly in case of damaging HDD. The correct step is using “Power Off” in the “Utilities” menu, o

Chapter5 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified

Move “Active Frame” to “User” icon, press【ENTER】key to enter into “User Management” menu. In the user name list box, only “admin” is existed.

5.2 Add and Delete User Enter into “User Management” interface. Add user The steps are following： Step 1：Enter into “User Management” menu Please

In the users list box of “User Management” menu, use【Ç】【È】keys to select the new user name, then use【Æ】key to “Default Rights” button, press【ENTER】, t

“Remote Rights”： PTZ Control：Remote control PTZ; Record：Remote manual start/stop recording; Playback：Remote playback, download the recorded files

5.3 Unit Name and Device ID Unit name In the “Display” menu： There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “

Content Chapter1 Product Introduction...6 1.1 Summary

5.4 Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with an

5.5 OSD Setup OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings

Display mode：There are several display modes：Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active

Chapter 3.4). The camera name can support 32 characters. Step 3：Press【ENTER】key to exit edit status. Move “Active Frame” to “Confirm” button, press【

5.6 Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters s

5.7 Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup ste

(22*15 for NTSC), you can use【↑】【↓】【→】【←】keys to move the yellow pane to your hope position and press【EDIT】key, the yellow pane will be turned into re

5.8 View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1：Enter into “Ima

Step 6：Alarm schedule setup：When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for ea

5.9 Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DVR wi

5.18 Transaction Information ...76 Chapter6 Utilities...

Step 5：Setup alarm policy：You can select one or more response solutions, including “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Tr

5.10 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1：Enter into “Image Setup” menu：

The whole screen is divided into 22*18 panes (NTSC：22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same

Step 6：Motion alarm record channel setup：When there is motion alarm happened, you can trigger related camera to start recording. In “Motion Alarm Han

5.11 Preview Properties In “Preview” menu, you can setup preview mode, screen switch time, enable or disable audio preview and preview layout. Step

Preview layout setup：There is a square frame divided into many windows. If you select “4 Screen”preview mode, this frame is divided into 4 windows. Ea

5.12 Recording Setup In main menu, there is an icon named “Recording”. You can enter into recording menu as following： “Recording” menu description

If you select variable bit rate, DVR will adjust the actual bit rate according to the video movement. When there is not much movement, DVR will use lo

Note：When the camera’s recording schedule is modified, you must reboot DVR to make it into effective. All day recording setup： Step 1：Enter into re

Step 1：Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“9” flag), press “Schedule” button to en

Chapter1 Product Introduction 1.1 Summary DVR-470/DVR-1670 H.264 network digital video recorder is an excellent digital surveillance product. It uses

5.13 External Alarm Input and Relay Output For DVR-470, there are 4 external alarm input and 2 relay output. For DVR-1670, there are 16 external alar

Step 4：Alarm trigger record channel setup You can select channels to record for each alarm input. In the sub menu, you can use【ENTER】or【EDIT】key t

First select one camera, then select one of following PTZ linkage： z Preset：Set the flag as “9” to enable preset, in the preset number edit box and

Step 3：Enter into alarm out schedule You can set the schedule to make alarm output into effective. Move “Active Frame” to “Schedule” button on right

5.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note：If any network parameter is modified, you mus

This DNS is special software, not the normal domain name server. You can use the provided SDK to develop this DNS software. Multicast IP：It is one

PTZ menu description Select channel：Select one PTZ camera. RS-485 parameters：Including baudrate, data bit, stop bit, parity, flow control, etc. Th

Cruise setup：Cruise is remembering the track of PTZ movement. Please make sure the PTZ you are using can support cruise function. Preset setup

In “Sequence” setup menu, first input the sequence number. The sequence is among 1 --- 16. Each sequence is made up of cruise points, and each cruis

Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press【ENTER】to save the operati

z Support cycle or none cycle record. z Support backup the recorded files and clips. Support USB memory, USB HDD, USB CD-R/W, USB DVD-R/W, IDE CD-R/

5.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss【ENTER】key, you enter into “RS

Username, password and Verify password：Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone：Only used when wor

Step 3：Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4：Setup Modem used on DVR side Use DCE calbe to connect Modem

Page 73

Step 3：Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connecte

5.17 Exceptions The exceptions can be handled at present include： hard disk full, hard disk error, illegal access, IP address conflict, network failur

5.18 Transaction Information The DVR can actively obtain or passively receive the credit card number from ATM machine linked through network or serial

Start & end position and length of transaction type Transaction type and code When the ATM machine is sending transaction information to bank cent

In the case, you must set the RS-232 of DVR as transparent channel mode as following： A software must be run in the ATM machine, and send the credit

In the case, you must set the RS-232 of DVR as transparent channel mode as following： Also, a software must be run in ATM machine, and send command

Chapter2 Installation Warning：Before you install the DVR, please make sure the power of DVR is off. 2.1 Checking the DVR and Its Accessories When you

Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”,

6.3 Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up di

6.4 Hard Disk Management Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all

If you want to view the log based on default option, just press【ENTER】key. DVR will list all matched information. Also you can select options to se

Step 4：When searching is finished, DVR will list all matched alarm information. In the list box, the information includes：Index, Occur Time, Major Typ

6.9 System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information：

Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. T

3. Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. 4. Create new user. Click “new user’. Ne

6. In the “User/Rights Security” Dialog, select “User Name” as “target”. In “Home Directory” edit box, input the path where the firmware file (d

7.2 Upgrade Mode 1. Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software

2.3 Rear Panel Description Notice：Please refer to real product for different model. DVR-470 Rear Panel DVR-1670 Rear Panel Index Physical Inte

Appendix A DVR Connect Cable Definition 1 UTP network connect cable made method Material and tool One twist cable (8 pin, the length can be defined

The corresponding relationship of cross cable 2 RS-232 connect cable made method DVR-802x has standard DB9 RS-232 interface, like PC COM port. P

Appendix B Specifications Model name DVR-470 DVR-1670 Video compression H.264 Preview resolution PAL：704*576 (4CIF), NTSC：704*480 (4CIF) Playback

Power supply 100~240VAC, 6.3A, 50~60 HZ Power consumption 20--42W (without HDD) Working temperature -10℃--＋55℃ Working humidity 10％--90％ Size 14.25

Appendix C List of Recommended DVR Peripherals USB DVD-R/W： 1. LG GSA-E10L 2. BENQ EW164B USB CD-R/W： 1. BENQ external 5232WI-ok2 2. ASUS CRW-4

West Digital： 1. WD Caviar WD400BB 2. WD Caviar WD800BB 3. WD Caviar WD1200BB 4. WD Caviar WD2000BB 5. WD Caviar WD2500BB 6. WD Caviar SE WD160

Appendix D Quick Search Function Table Type Name Description Index User management Create and delete users. System has one default administrator. T

Remote record Remote record real time stream. * Remote playback Remote playback the recorded files in DVR * Download Download recorded files in DVR

Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, “POWER” light in front Panel does not turn

3) Old player SDK (playm4.dll) Notes： 1) Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humi