Planet-technology ADSL 2/2+ Router ADE4400v2 Manual de usuario

ADSL 2/2+ Router ADE-3410 / ADE-3400v2 / ADE4400v2 User's Manual

Top-mounted LEDs of ADE-4400v2 LED Indicator LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit whe

Blinking when data is Transmitted / Received. 5 SYS: Lit when the system is ready. 6 PWR: Lit when power is ON. Rear Panel of ADE-3410

can not login to the router, e.g. forgot the password) 4 LAN Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when conne

USB Cable ADSL Line PC / HubPower Adapter ADE-3400v2 ADSL Line PC / HubPower Adapter ADE-4400v2 PC / HubADSL Line Power Adapter

2.3 Installing the USB Driver on a PC (ADE-3410) If you connect the device through USB port instead of Ethernet port, Windows will automatically detec

3. Then follow screen. 4. Click the type of setup you prefer, then click “Next”.

5. Setup enough information of coping the program files then click “Next”. 6. Please plug USB cable into ADSL USB Modem.

7. Click “Finish”. 8. The windows will show the screen and please enter “User Name” and “Password” to configure the status report on web page.

2. Choose the setup language and click “Next”. (There are three languages that user can choose: English, German, and French) 3. Then follow screen

Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Dou

Copyright Copyright© 2006 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s

5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configur

3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain

Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3

1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol a

3 Configuration 3.1 Determine your connection settings Before you configure the router, you need to know the connection information sup

3.3 Configuring with Web Browser It is advisable to change the administrator password to safeguard the security of your network. To configure the r

3.3.1 Quick Setup Guide You can use "Quick Setup" to setup the router as follows, and the router will connect to the Internet via ADSL lin

Step 1 - Click "Next" to setup your new administrator's password. Step 2 - Click "Next" to setup your time zone.

Step 3 - Click "Next" to setup your Internet connection type. You can have this information from your Internet Service Provider. Ent

29

FCC Caution: To assure continued compliance (example-use only shielded interface cables when connecting to computer or peripheral devices). Any chan

3.3.2 System Time Go to Maintenance->Time Zone and select system time as you wish. Connecting to a Simple Network Time Protocol (SNTP) server

3.3.4 Firmware Update Go to Maintenance -> Firmware to upgrade the firmware. The new firmware for your router can improve functionality and perfo

3.3.6 System Reset In the event that the router stops responding correctly or in some way stops functioning, you can perform a reset. Your setting

3.4.1 ADSL Status Go to Status->Device Info. The 'ADSL Line Status' enables you to check the status of your ADSL connection including ho

3.4.3 VC Configuration Go to Interface Setup -> Internet. To add or delete ADSL VC configuration, these information provide by ISP. 3.

PPPoE: PPP over Ethernet is a common connection method used for xDSL PPPoA: PPP over ATM is a common connection method used for xDSL Bridge: Bridg

3.5.3 DNS Go to Interface -> LAN to enable DHCP server. Then you can set DNS server for the router. A Domain Name system (DNS) server is like

3.5.4 DDNS Go to Access Management -> DDNS to setup your DDNS parameters. Dynamic DNS allows you to update your dynamic IP address with one

3.6.1 LAN Configuration Go to Interface Setup -> LAN. The 'LAN Settings' option enables you to configure the LAN port. If the DHCP

“Block WAN Scan” allows you to prevent the hackers from testing the services of the router. Add IP filtering rule to block certain packet from WAN. I

Revision User’s Manual for ADSL 2/2+ Router Model: ADE-3410 / ADE-3400v2 / ADE-4400v2 Rev: 1.0 (May 2006) Part No. EM-ADE3410v1

Destination Port Number: This is the Port or Port Ranges that defines the application. Protocol: It is the packet protocol type used by the applicatio

3.8.2 Virtual Server Go to Advanced Setup ->NAT -> Virtual Server to set virtual server as you need. (known as Port Mapping). You can config

3.8.3 DMZ Setting Go to Advanced Setup ->NAT -> DMZ to set DMZ parameters. If you have a local client PC that cannot run an Internet applic

3.8.4 ADSL Type Setting Go to Advanced Setup ->ADSL to set different ADSL connection If you meet an ADSL connection problem, you can select a diff

3.9.2 Dynamic Routing Go to Interface Setup -> Internet to select Dynamic Route as you need. The dynamic routing feature of the router can be used

3.10.1 System Status Go to Status -> Device Info to see the router's information. The System Status page shows the WAN, LAN and the route

3.11.1 Access Control List Go to Access Management -> ACL to see the Access Control List. Access Control Listing allows you to determine which serv

between network devices. SNMP is a member of the TCP/IP protocol suite. The device supports SNMP agent functionality which allows a manager station to

UPnP: Select this checkbox to activate UPnP. Be aware that anyone could use an UPnP application to open the Web configurator's login screen with

Appendix A: Glossary Address mask A bit mask select bits from an Internet address for subnet addressing. The mask is 32 bits long and selects the net

Table of Contents 1. INTRODUCTION...7 1.1 FEATURE...

CO Central Office. Refers to equipment located at a Telco or service provider's office. CPE Customer Premises Equipment located in a user's

transmission rate of 10 Mbps. FTP File Transfer Protocol. The Internet protocol (and program) transfer files between hosts. Hop count A measure of d

IP address The 32-bit address assigned to hosts that want to participate in a TCP/IP Internet. ISP Internet service provider - A company allows home

PPPoE PPP over Ethernet is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. Re

(2) IBM term for software interfaces that allow two UNIX application programs to talk via TCP/IP protocols. Spanning-Tree Bridge Protocol (STP) Spann

Telnet The virtual terminal protocol in the Internet suite of protocols - Allows users of one host to log into a remote host and act as normal termina

3.8.3 DMZ SETTING...42 3.8.4 ADSL TYPE SETTING...

1. Introduction The PLANET ADSL 2/2+ Router, ADE-3410 / ADE-3400v2 / ADE-4400v2, provides office and residential users the ideal solution for sharing

 Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the device supports both Dynamic IP Address (IP Address is allocated on connect

‧ Power Adapter ‧ Quick Installation Guide ‧ User’s Manual CD ‧ RJ-11 (ADSL) cable ‧ RJ-45 cable ‧ USB cable (ADE-3410) 1.3 Physical Details To