Planet Technology GT-902 Manual de usuario descargar pdf (Pagina 14)

2.2.2 Chassis Installation and Rack Mounting

To install the Managed Media Converter in a 10-inch or 19-inch with standard rack, follow the instructions described

below.

Step 1: Place your Managed Media Converter on a hard flat surface, with the front panel positioned towards your front

side.

Step 2: Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis.

Figure 2-5: Insert a Managed Media Converter into an available slot

Step 3: Attach a rack-mount bracket to each side of the Chassis with supplied screws attached to the package.

Step 4: After the brackets are attached to the chassis, use suitable screws to securely attach the brackets to the rack, as

shown in Figure 2-6.

Step 5: Precede with the steps 4 and steps 5 of session 2.2.1 Stand-alone Installation to connect the network cabling

and supply power to your Chassis.

Caution:

You must use the screws supplied with the mounting brackets. Damage caused to the parts by using

incorrect screws would invalidate your warranty.

-10-

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 61 62

Sin comentarios

Planet Technology GT-902 Manual de usuario Pagina 14