Planet Technology WAP-4035 Manual de usuario descargar pdf (Pagina 10)

Chapter 2 Hardware Installation

Before you proceed with the installation, it is necessary that you have enough information about the

WAP-4035.

1. Locate an optimum location for the WAP-4035. The best place for your WAP-4035 is usually

at the center of your wireless network, with line of sight to all of your mobile stations.

2. Assemble the antenna to WAP-4035. Try to place them to a position that can best cover your

wireless network. The antenna’s position will enhance the receiving sensitivity.

3. Connect RJ-45 cable to WAP-4035. Connect this WAP-4035 to your LAN switch/hub or a single

PC.

4. Plug in power adapter and connect to power source. After power on, WAP-4035 will start to

work.

Note:

ONLY use the power adapter supplied with the WAP-4035. Otherwise, the product may be

damaged. If you want to reset your WAP-4035 to default settings, press the Reset button 5

second. Then release the button and wait for 10 seconds for rebooting.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Sin comentarios

Planet Technology WAP-4035 Manual de usuario Pagina 10