Planet Technology POE-1200 Manual de usuario descargar pdf (Pagina 13)

Figure 2-7 Network application installation

The PoE Injector Hub supports Data passive mode, that is, even the PoE Injector Hub is manual power off, the data

between “

ATA” port and “DATA+PoE” port can still be transmitted without data loss.

The POE-1200 / POE-2400 Mid-Span Injector Hub doesn’t support Gigabit data rate. The Ethernet

switches or PoE PDs with Gigabit interface will operate at 100Mpbs Full Duplex mode when connect

to the Mid-Span Injector Hub.

2.2.4 Power over Ethernet Powered Device

3~5 watts

Voice over IP phones

Enterprise can install POE VoIP Phone, AT

A and other Ethernet/non-Ethernet

end-devices to the central where UPS

is installed for un-interrupt power system

and power control system.

6~12 watts

Wireless LAN Access Points

Museum, Sightseeing, Airport, Hotel, Campus, F

actory,

Warehouse can install

the Access Point any where with no hesitation

10~12 watts

IP Surveillance

Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera w

ithout

limits of install location – no need electrician to install AC sockets.

3~12 watts

PoE Splitter

PoE Splitter split the PoE 48V DC over

the Ethernet cable into 5/9/12V DC

power

output. It frees the device deployment from restrictions due to power

outlet locations, which eliminate the costs for additional AC wiring and reduces

the installation time.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 40 41

Sin comentarios

Planet Technology POE-1200 Manual de usuario Pagina 13