Planet-technology ISW-800M Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 57
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Off No device attached
Yellow The port is operating in full-duplex mode.
Blinks Collision of Packets occurs in the port.
FDX/COL
(Port 7 & 8)
Off The port in half-duplex mode or no device attached
2.1.4 Reset Button
The reset button provides user a quick and easy way to restart and set the configuration back to default
value.
Restart: press the button for 2 seconds and release.
Set to factory default value: press the button for 5 seconds and release. The switch
will set all configurations back to default setting.
2.1.5 DIP Switches
The switch provides the 9 DIP-switch for configuring the relay alarm operation mode and the ring master
operation mode. The default value of Dipswitch is OFF.
DIP Switch No
Status Description
OFF Disable port 1 Alarm
1
ON
Enable port 1 Alarm. If the port’s link fails, the fault LED will
light up.
OFF Disable port 2 Alarm
2
ON
Enable port 2 Alarm. If the port’s link fails, the fault LED will
light up.
OFF Disable port 3 Alarm
3
ON
Enable por 3 t Alarm. If the port’s link fails, the fault LED will
light up.
OFF Disable port 4 Alarm
4
ON
Enable port 4 Alarm. If the port’s link fails, the fault LED will
light up.
OFF Disable port 5 Alarm
5
ON
Enable port 5 Alarm. If the port’s link fails, the fault LED will
light up.
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 56 57

Comentarios a estos manuales

Sin comentarios