Planet-technology ISW-800M Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 57
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Step2: Lightly push the button of DIN-Rail into the track.
Step3: Check the DIN-Rail is tightly on the track.
Step4: To remove the industrial switch from the track, reverse steps above.
2.2.2 Wall Mount Plate Mounting
To install the switch on the wall, please follows the instructions described below.
Step1: Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
Step2: Place the wall mount plate on the rear panel of the industrial switch.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

Comentarios a estos manuales

Sin comentarios