Planet Technology 170S8FS Manual de usuario descargar pdf (Pagina 17)

4.1.3.3 SNMP Conguration

Get Community Name: to get the device community name (default = public).

Set Community Name: to set the device community name (default = private).

Trap Community Name: to authorize the device trap community name (default =

public).

Trap Host IP Address: to set the trap host IP address (same as monitoring station IP

address).

Cold Start trap: to set the trap for rebooting the device (default = enable).

Warm Start trap: to set the trap when the device had been reset (default = enable).

Authentication Fail Trap: to set the warning trap when the community name of the

device and workstation are different (default = enable).

Power Fail Trap: to set the Power Fail Trap (default = enable).

Fan Fail Trap: to set the fan fail trap (default = enable).

MC Plug-in Trap: to set the trap when a Media Converter module has been plugged in

(default = enable).

MC Pullout Trap: to set the trap when the Media Converter module has been pulled out

(default = enable).

MC Broken trap: to set the trap when the Media Converter module was broken (default

= enable).

MC Link up trap: to set the trap when a linking is connected (default = enable).

MC Link down trap: to set the trap when a linking is disconnected (default = enable).

MC Active Slot Xchg trap: to set the trap when there is a redundant function activated

(default = enable).

MC Active Slot Lose trap: to set the trap when the redundant function is fail (default

= enable).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Sin comentarios

Planet Technology 170S8FS Manual de usuario Pagina 17