Planet Technology 170S8FS Manual de usuario descargar pdf (Pagina 21)

Warm Start trap: to set the trap when the device had been reset (default = enable).

Authentication Fail Trap: to set the warning trap when the community name of the

device and workstation are different (default = enable).

Power Fail Trap: to set the Power Fail Trap (default = enable).

Fan Fail Trap: to set the Fan fail trap (default = enable).

MC Plug-in Trap: to set the trap when a Media Converter Module has been plugged in

(default = enable).

MC Pullout Trap: to set the trap when the Media Converter Module has been pulled out

(default = enable).

MC Broken trap: to set the trap when the Media Converter Module was broken (default

= enable).

MC Link up trap: to set the trap when a linking is connected (default = enable).

MC Link down trap: to set the trap when a linking is disconnected (default = enable).

MC Active Slot Xchg trap: to set the trap when there is a redundant function activated

(default = enable).

MC Active Slot Lose trap: to set the trap when the redundant function is fail (default

= enable).

4.2.2.4 Location Setting

Assign each slot’s location or name in order to remember in where each slot was

connected.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

Planet Technology 170S8FS Manual de usuario Pagina 21