Planet Technology FPS-1010G Manual de usuario descargar pdf (Pagina 32)

The rm= entry should correspond to the IP address you have assigned to the print server. You

can also use a host name if you have assigned one in the /etc/hosts file.

The sd= entry should correspond to the spool directory you created in the previous step.

The rp= entry should correspond to the port name of the remote printer. The values should be

one of lpt1, lpt2 or lpt3 depends on the printer port.

The print server should now be available for printing from your Unix host.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 74 75

Sin comentarios

Planet Technology FPS-1010G Manual de usuario Pagina 32