Planet Technology WAP-1963 Manual de usuario descargar pdf (Pagina 14)

3.1.3 Wireless Advance Settings:

You can set advanced parameters of this WAP-1963. The parameters include Authentication Type,

Fragment Threshold, RTS Threshold, Beacon Interval, Data Rate, Preamble Type, and Broadcast

ESSID. You should not change these parameters unless you know what effect the changes will have

on WAP-1963. When configuration finished, please click “Apply” to save the settings.

Parameters Description

Authentication Type There are two authentication types: “Open System” and “Shared Key”

. When you

select “Open System”

, wireless stations can associate with this access point

without WEP encryption. When you select “Shared Key”

, you should also setup

WEP key in the “Encryption”

page and wireless stations should use WEP

encryption in the authentication phase to associate with this access point. If you

select “Both”, the wireless client can associa

te with this access point by using

any one of these two authentication types.

Fragment Threshold

“Fragment Threshold”

specifies the maximum size of packet during the

fragmentation of data to be transmitted. If you set this value too low, it will result

in bad performance.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Sin comentarios

Planet Technology WAP-1963 Manual de usuario Pagina 14