Planet Technology WAP-4030A Manual de usuario descargar pdf (Pagina 8)

Chapter 2 Hardware Installation

Before you proceed with the installation, it is necessary that you have enough information about the

WAP-4030A.

2.1 Hardware Connection

12V DC

LAN

RESET ANT

1. Locate an optimum location for the WAP-4030A. The best place for your WAP-4030A is

usually at the center of your wireless network, with line of sight to all of your mobile stations.

2. Assemble the antenna to WAP-4030A. Try to place them to a position that can best cover your

wireless network. The antenna’s position will enhance the receiving sensitivity.

3. Connect RJ-45 cable to WAP-4030A. Connect this WAP-4030A to your LAN switch/hub or a

single PC.

4. Plug in power adapter and connect to power source. After power on, WAP-4030A will start to

work.

Note: ONLY use the power adapter supplied with the WAP-4030A. Otherwise, the product may be

damaged.

If you want to reset your WAP-4030A to default settings, press the Reset button 5 second.

Then release the button and wait for 10 seconds for rebooting.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Sin comentarios

Planet Technology WAP-4030A Manual de usuario Pagina 8