Planet Technology WAP-4060PE Manual de usuario descargar pdf (Pagina 7)

n Provide Windows-base utility, Web, and CLI (Command Line Interface) Configuration

n SNMP support

1.4 Physical Details

Front panel

STATUS On - Error condition.

Off - Normal operation.

Blinking - During start up, and when the Firmware is being upgraded.

POWER On - Normal operation.

Off - No power

LAN On - The LAN (Ethernet) port is active.

Off - No active connection on the LAN (Ethernet) port.

Flashing - Data is being transmitted or received via the correspond-

ing LAN (Ethernet) port.

WLAN On - Idle

Off - Error- Wireless connection is not available.

Flashing - Data is being transmitted or received via the Wireless

access point. Data includes "network traffic" as well as user data.

Rear panel

ANT

One dipole antenna is supplied. Best results are usually obtained

with the antenna in a vertical position.

CONSOLE

DB9 female RS232 port.

RESET Button

This button has two (2) functions:

· Reboot. When pressed and released, the WAP-4060PE will

reboot (restart).

· Reset to Factory Defaults. This button can also be used to

clear ALL data and restore ALL settings to the factory default

values.

To Clear All Data and restore the factory default values:

1. Power Off the WAP-4060PE.

2. Hold the Reset Button down while you Power On the device.

1 2 3 4 5 6 7 8 9 10 11 12 ... 88 89

Sin comentarios

Planet Technology WAP-4060PE Manual de usuario Pagina 7