Planet Technology ICS-102 Manual de usuario descargar pdf (Pagina 43)

User’s Manual of ICS-10x

-39-

Setup Operation Mode and Serial Port of ICS-10x

1. Set the ICS-10X mode to “Telnet server mode” from web interface.

2. Set the Serial Port Configuration of ICS-10x as below:

Mode:

RS-232

Baudrare:

9600

Character Bits:

Parity Type :

none

Stop Bit :

Hardware Flow Control:

none

Execute “Telnet” command from Windows Start Menu

3. Click the Start Menu and go to Run

4. Type "telnet" without the quotes, and hit enter.

Figure 4-40 Example Windows Excuse - Telnet

5. While the Telnet window appears, type “open xxx,xxx,xxx,xxx”, xxx is the IP address of the ICS-10x Telnet Server.

In this case we type “open 192.168.0.100” and press enter.

Figure 4-41 Example Windows Excuse - Telnet

6. Then can use the telnet connection to configure the switch just like console direct connect to the COM port of the

switch.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 62 63

Sin comentarios

Planet Technology ICS-102 Manual de usuario Pagina 43