Planet-technology G.SHDSL.bis Bridge Router GRT-504 Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
Type the WAN1 Parameters;
VPI: 0
VCI: 32
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Note: The Protocol used in CO and CPE have to be the same.
Click Next to setup the IP parameters.
For more understanding about NAT, review the chapter of NAT/DMZ .
IP Address: 192.168.20.1
Subnet Mask: 255.255.255.0
Gateway: 192.169.30.2
Click Next
The screen will prompt the parameters that we will write in NVRAM. Check the parameters before
writing in NVRAM.
Press Restart to restart the router working with new parameters or press continue to setup another
parameter.
6.6.2.2 CPE side
Click ROUTE and CPE Side then press Next.
102
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 151 152

Comentarios a estos manuales

Sin comentarios