Planet-technology G.SHDSL.bis Bridge Router GRT-504 Manual de usuario Pagina 139
- Pagina / 152
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.12.5 VLAN
Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so
that they can communicate as if they were attached to the same wire, when in fact they are located
on a number of different LAN segments. Because VLAN is based on logical instead of physical
connections, it is extremely flexible.
You can setup the Virtual LAN (VLAN) parameters in vlan command. The router support the
implementation of VLAN-to-PVC only for bridge mode operation, i.e., the VLAN spreads over both
the COE and CPE sides. The unit supports up to 8 active VLANs with shared VLAN learning (SVL)
bridge out of 4096 possible VLANs specified in IEEE 802.1Q.
Move the cursor “ >> “ to vlan and press enter.
>> mode Trigger virtual LAN function
modify Modify virtual LAN rule
pvid Modify port default VID
link_mode Modify port link type
List
Show VLAN configuration
To active the VLAN function, move the cursor “ >> “ to mode and press enter. The products support
two types of VLAN, 802.11q and Port-Based. The IEEE 802.1Q defines the operation of VLAN
bridges that permit the definition, operation, and administration of VLAN topologies within a
bridged LAN infrastructure. Port-Based VLANs are VLANs where the packet forwarding decision is
based on the destination MAC address and its associated port.
7.12.6 802.11Q VLAN
Follow the following steps to configure 802.11q VLAN.
----------------------------------------------------------------------
Command: setup vlan active <Disable|8021Q|Port>
Message: Please input the following information.
Tigger VLAN function (Tab select) <Disable>: 8021Q
----------------------------------------------------------------------
To modify the VLAN rule, move the cursor “ >> “ to modify and press enter.
----------------------------------------------------------------------
Command: setup vlan modify <1~8> <1~4094> <string>
Message: Please input the following information.
Rule entry index <1~8>: 1
VLAN ID (ENTER for default) <1>: 10
VLAN port status (ENTER for default)<111111111111>:111111000000
----------------------------------------------------------------------
For each VLAN, VLAN ID is a unique number among 1~4095.
VLAN port status is a 12-digit binary number whose bit-1 location indicates the VLAN port
membership in which 4MSBs and 8MSB represents LAN ports and WAN port, respectively. For
example: the above setting means that the VID 20 member port includes LAN1, LAN2 and WAN.
138
- User’s Manual 1
- Table of Contents 4
- 1 Descriptions 8
- 1.2 Specification 10
- Package Contents 11
- 1.3 Applications 12
- 2.1 Front Panel 13
- 2.2 Rear Panel 14
- 2.4 Console Cable 15
- Firewall 16
- 3.2 Types of Firewall 17
- 3.2.1 Packet Filtering 17
- 3.2.2 Circuit Gateway 18
- 3.2.3 Application Gateway 19
- Inturruption 20
- 4.1 Specification 22
- 4.2 Frame Specification 22
- 4.3 Applications 23
- 5.1 Check List 26
- Function Listing 32
- 6.1 Basic Setup 33
- 6.1.2 Routing Mode 36
- 6.1.3 Reference diagram 45
- 6.2 Advanced Setup 47
- 6.2.1.2 Line Type 48
- 2-wire mode 48
- M – Pair Mode 48
- Auto Fall Back Mode 48
- Stanby Mode 48
- Multi–Link Mode 49
- 6.2.1.3 TCPAM Type 49
- 6.2.1.4 Data Rate 49
- 6.2.1.5 SNR Margin 50
- 6.2.2 WAN 51
- 6.2.3 Bridge 54
- 6.2.4 VLAN 56
- 6.2.4.2 Port-Based VLAN 57
- 6.2.5 STP 59
- 6.2.6 Route 60
- 6.2.7 NAT/DMZ 63
- 6.2.7.1 Multi-DMZ 65
- 6.2.7.2 Mutli-NAT 65
- 6.2.8 Virtual Server 66
- 6.2.9 Firewall 68
- 6.2.10 IP QoS 75
- 6.3 Status 78
- 6.3.1 SHDSL.bis 79
- 6.3.2 LAN 80
- 6.3.3 WAN 81
- 6.3.4 ROUTE 82
- 6.3.5 INTERFACE 83
- 6.3.6 FIREWALL 84
- 6.3.7 IP QoS 85
- 6.3.8 STP 86
- 6.4 Administration 88
- 6.4.2 SNMP 90
- 6.4.2.2 Trap host pool 91
- 6.4.3 Time Sync 92
- 6.4.3.2 SNTP v4.0 93
- 6.5 Utility 94
- 6.5.2 Config Tool 95
- 6.5.3 Upgrade 97
- 6.5.4 Logout 98
- 6.5.5 Restart 98
- 6.6 Example 100
- 6.6.1.2 CPE Side 101
- 6.6.2.1 CO Side 102
- 6.6.2.2 CPE side 103
- Manu Driven Interface 106
- 7.1.3 Operation Interface 107
- 7.1.4 Window structure 107
- 7.3 Enable 110
- 7.4 Status 111
- 7.4.1 Shdsl.bis 111
- 7.4.2 Wan 112
- 7.4.3 Route 112
- 7.4.4 Interface 113
- 7.4.5 Firewall 113
- 7.4.6 IP_QoS 114
- 7.4.7 STP 115
- 7.5 Show 116
- 7.5.1 System information 116
- 8 hours 119
- 7.6 Write 123
- 7.7 Reboot 124
- 7.8 Ping 125
- 7.9 Administration 126
- 7.9.1 User Profile 126
- 7.9.2 Security 127
- 7.9.3 SNMP 128
- 7.9.5 SNTP 130
- : 8 hours 131
- 7.10 Utility 132
- 7.10.1 Upgrade 132
- 7.10.2 Backup 132
- 7.10.3 Restore 133
- 7.11 Exit 134
- 7.12 Setup 135
- 7.12.1 Mode 135
- 7.12.2 SHDSL.bis 135
- 7.12.3 WAN 136
- 7.12.4 Bridge 138
- 7.12.5 VLAN 139
- 7.12.6 802.11Q VLAN 139
- 7.12.7 STP 140
- 7.12.8 Route 140
- 7.12.9 LAN 142
- 7.12.10 IP share 142
- 7.12.10.2 PAT 144
- 7.12.10.3 DMZ 145
- 7.12.11 Firewall 146
- 7.12.11.3 DoS Protection 147
- 7.12.12 IPQoS 149
- 7.12.13 DHCP 150
- 7.12.14 DNS proxy 151
- 7.12.15 Host name 151
- 7.12.16 Default 151
- EC Declaration of Conformity 152
Relacionado con productos y manuales para Hardware Planet-technology G.SHDSL.bis Bridge Router GRT-504
Hardware Planet-technology VC-200S Manual de usuario
(56 paginas)
(56 paginas)
Hardware Planet-technology SKG-300 Manual de usuario
(36 paginas)
(36 paginas)
Hardware Planet-technology BT-420U Manual de usuario
(54 paginas)
(54 paginas)
Hardware Planet-technology VIP-110 Manual de usuario
(72 paginas)
(72 paginas)
Hardware Planet-technology GRT-101 Manual de usuario
(73 paginas)
(73 paginas)
Hardware Planet-technology WPG-110 Manual de usuario
(36 paginas)
(36 paginas)
Hardware Planet-technology UE-9521 Manual de usuario
(13 paginas)
(13 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.098 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales