Planet-technology G.SHDSL.bis Bridge Router GRT-504 Manual de usuario Pagina 141
- Pagina / 152
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
With Dynamic Routing, you can enable the Router to automatically adjust to physical changes in
the network’s layout. The Cable/DSL Firewall Router, using the RIP protocol, determines the
network packets’ route based on the fewest number of hops between the source and the
destination. The RIP protocol regularly broadcasts routing information to other routers on the
network.
You can setup 20 sets of static route in static command. After entering static menu, the screen will
show as follow:
>> add Add static route entry
delete Delete static route entry
List
Show static routing table
You can add 20 sets of static route entry by using add command. Type the IP information of the
static route including IP address, subnet mask and gateway.
You can delete the static route information via delete command.
You can review the static route entry by using list command.
To configure Routing Information Protocol (RIP), you can use rip command to setup the
parameters. Move the cursor “>>” to rip and press enter.
>> generic Configure operation and auto summery mode
lan Configure LAN interface RIP parameters
wan Configure WAN interface RIP parameters
list Show RIP configuration
Generic command can setup RIP mode and auto summery mode.
If there are any routers in your LAN, you can configure LAN interface RIP parameters via lan
command.
The product supports 8 PVCs and you can configure the RIP parameters of each WAN via wan
command. Move the cursor “>>” to wan and press enter.
----------------------------------------------------------------------
Command: setup route rip wan <1~8> <more...>
Message: Please input the following information.
Active interface number <1~8>: 1
----------------------------------------------------------------------
The screen will prompt as follow:
>> attrib Operation, authentication and Poison reverse mode
version RIP protocol version
authe
Authentication code
Attrib command can configure RIP mode, authentication type and Poison reverse mode.
Version command can configure RIP protocol version.
140
- User’s Manual 1
- Table of Contents 4
- 1 Descriptions 8
- 1.2 Specification 10
- Package Contents 11
- 1.3 Applications 12
- 2.1 Front Panel 13
- 2.2 Rear Panel 14
- 2.4 Console Cable 15
- Firewall 16
- 3.2 Types of Firewall 17
- 3.2.1 Packet Filtering 17
- 3.2.2 Circuit Gateway 18
- 3.2.3 Application Gateway 19
- Inturruption 20
- 4.1 Specification 22
- 4.2 Frame Specification 22
- 4.3 Applications 23
- 5.1 Check List 26
- Function Listing 32
- 6.1 Basic Setup 33
- 6.1.2 Routing Mode 36
- 6.1.3 Reference diagram 45
- 6.2 Advanced Setup 47
- 6.2.1.2 Line Type 48
- 2-wire mode 48
- M – Pair Mode 48
- Auto Fall Back Mode 48
- Stanby Mode 48
- Multi–Link Mode 49
- 6.2.1.3 TCPAM Type 49
- 6.2.1.4 Data Rate 49
- 6.2.1.5 SNR Margin 50
- 6.2.2 WAN 51
- 6.2.3 Bridge 54
- 6.2.4 VLAN 56
- 6.2.4.2 Port-Based VLAN 57
- 6.2.5 STP 59
- 6.2.6 Route 60
- 6.2.7 NAT/DMZ 63
- 6.2.7.1 Multi-DMZ 65
- 6.2.7.2 Mutli-NAT 65
- 6.2.8 Virtual Server 66
- 6.2.9 Firewall 68
- 6.2.10 IP QoS 75
- 6.3 Status 78
- 6.3.1 SHDSL.bis 79
- 6.3.2 LAN 80
- 6.3.3 WAN 81
- 6.3.4 ROUTE 82
- 6.3.5 INTERFACE 83
- 6.3.6 FIREWALL 84
- 6.3.7 IP QoS 85
- 6.3.8 STP 86
- 6.4 Administration 88
- 6.4.2 SNMP 90
- 6.4.2.2 Trap host pool 91
- 6.4.3 Time Sync 92
- 6.4.3.2 SNTP v4.0 93
- 6.5 Utility 94
- 6.5.2 Config Tool 95
- 6.5.3 Upgrade 97
- 6.5.4 Logout 98
- 6.5.5 Restart 98
- 6.6 Example 100
- 6.6.1.2 CPE Side 101
- 6.6.2.1 CO Side 102
- 6.6.2.2 CPE side 103
- Manu Driven Interface 106
- 7.1.3 Operation Interface 107
- 7.1.4 Window structure 107
- 7.3 Enable 110
- 7.4 Status 111
- 7.4.1 Shdsl.bis 111
- 7.4.2 Wan 112
- 7.4.3 Route 112
- 7.4.4 Interface 113
- 7.4.5 Firewall 113
- 7.4.6 IP_QoS 114
- 7.4.7 STP 115
- 7.5 Show 116
- 7.5.1 System information 116
- 8 hours 119
- 7.6 Write 123
- 7.7 Reboot 124
- 7.8 Ping 125
- 7.9 Administration 126
- 7.9.1 User Profile 126
- 7.9.2 Security 127
- 7.9.3 SNMP 128
- 7.9.5 SNTP 130
- : 8 hours 131
- 7.10 Utility 132
- 7.10.1 Upgrade 132
- 7.10.2 Backup 132
- 7.10.3 Restore 133
- 7.11 Exit 134
- 7.12 Setup 135
- 7.12.1 Mode 135
- 7.12.2 SHDSL.bis 135
- 7.12.3 WAN 136
- 7.12.4 Bridge 138
- 7.12.5 VLAN 139
- 7.12.6 802.11Q VLAN 139
- 7.12.7 STP 140
- 7.12.8 Route 140
- 7.12.9 LAN 142
- 7.12.10 IP share 142
- 7.12.10.2 PAT 144
- 7.12.10.3 DMZ 145
- 7.12.11 Firewall 146
- 7.12.11.3 DoS Protection 147
- 7.12.12 IPQoS 149
- 7.12.13 DHCP 150
- 7.12.14 DNS proxy 151
- 7.12.15 Host name 151
- 7.12.16 Default 151
- EC Declaration of Conformity 152
Relacionado con productos y manuales para Hardware Planet-technology G.SHDSL.bis Bridge Router GRT-504
Hardware Planet-technology VC-200S Manual de usuario
(56 paginas)
(56 paginas)
Hardware Planet-technology SKG-300 Manual de usuario
(36 paginas)
(36 paginas)
Hardware Planet-technology BT-420U Manual de usuario
(54 paginas)
(54 paginas)
Hardware Planet-technology VIP-110 Manual de usuario
(72 paginas)
(72 paginas)
Hardware Planet-technology GRT-101 Manual de usuario
(73 paginas)
(73 paginas)
Hardware Planet-technology WPG-110 Manual de usuario
(36 paginas)
(36 paginas)
Hardware Planet-technology UE-9521 Manual de usuario
(13 paginas)
(13 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.074 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales