Planet-technology IP DSLAM IDL-4801 Manual de usuario descargar pdf (Pagina 263)

100

101

IP DSLAM

263

5.9.14 ADSL ATUR Interval Commands

5.9.14.1 Get adsl atur interval

Description:

This command is used to get.

Command Syntax:

get adsl atur interval ifname <interface-name> [nintrvl <nintrvl-val>]

Parameters:

Name Description

ifname

<interface-name>

The ADSL interface name.

Type : Get – Mandatory

Valid values: dsl-0 – dsl-23

nintrvl <nintrvl-val>

Number of 15 minutes intervals.

Type: Get － Optional

Valid values: 1 - 96

Example:

$ get adsl atur interval ifname dsl-0 nintrvl 1

Output:

Ifname : dsl-0

IntervalNumber : 1 IntervalValidData : true

IntervalLofs(sec) : 10 IntervalLoss(sec) : 10

IntervalLprs(sec) : 10

IntervalLESs(sec) : 10

Output Fields:

FIELD Description

Ifname The IfIndex of DSL port

IntervalNumber Count from 1 through 96 of 15 minute intervals. Performance Data Interval number 1 is the

most recent previous interval; interval 96 is 24 hours ago.

IntervalValidData This variable indicates if the data for this interval is valid.

IntervalLofs(sec) Count of seconds in the interval when there was Loss of Framing.

IntervalLoss(sec) Count of seconds in the interval when there was Loss of Signal.

IntervalLprs(sec) Count of seconds in the interval when there was Loss of Power.

IntervalESs(sec) Count of Errored Seconds in the interval. The errored second parameter is a count of

one-second intervals containing one or more crc anomalies, or one or more los or sef defects.

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 706 707

Comentarios a estos manuales

Sin comentarios

Planet-technology IP DSLAM IDL-4801 Manual de usuario Pagina 263

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Planet-technology IP DSLAM IDL-4801