Planet-technology IP DSLAM IDL-4801 Manual de usuario descargar pdf (Pagina 703)

100

101

IP DSLAM

703

802.1X CLI commands

Specifying RADIUS Servers

To specify one or more RADIUS servers, perform this task in privileged mode:

Task Command

Step 1 Specify the IP address of up to three RADIUS

servers. Specify the primary server using the

primary keyword. Optionally, specify the destination

UDP port to use on the server.

create radius server

ip_addr [acct-port

port_number] [primary]

Step 2 Verify the RADIUS server configuration.

get radius

Specifying the RADIUS Key

Use the RADIUS key to encrypt and authenticate all communication between the

RADIUS client and server. You must configure the same key on the client and the

RADIUS server.

The length of the key is limited to 65 characters. It can include any printable ASCII

characters except tabs.

To specify the RADIUS key, perform this task in privileged mode:

Task Command

Step 1 Specify the RADIUS key that is used to encrypt

packets that are sent to the RADIUS server.

create radius key key

Step 2 Verify the RADIUS configuration.

get radius

Configuring 802.1X Authentication

The following sections describe how to configure 802.1X authentication on the switch.

1 2 ... 698 699 700 701 702 703 704 705 706 707

Comentarios a estos manuales

Sin comentarios

Planet-technology IP DSLAM IDL-4801 Manual de usuario Pagina 703

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Planet-technology IP DSLAM IDL-4801