Planet-technology IP DSLAM IDL-4801 Manual de usuario descargar pdf (Pagina 291)

100

101

IP DSLAM

291

Valid values: False, True

psdmaskusfallbackenable

False | True

Conexant parameter used to enable Mask on Demand (MoD) fallback

mode. When enabled, the system chooses MoD or the base ADSL2

depending upon the upstream rate. It is avaiable only for ADSL2 Annex

A.(length = 4 bytes)

Type: Modify -- Optional

Valid values: False, True

atucconfmaxnompsdds

<atucconfmaxnompsdds-val>

This parameter specifies the maximum nominal transmit

PSD(MAXNOMPSD) level during initialization and showtime. Value

depends on CO MIB element settings and near end transmitter

capabilities and is exchanged in the G.994.1 Phase. It is available only

for ADSL2/ADSL2plus. Value ranges from -60 to -40 in steps of 0.1

dBm/Hz.(length = 4 bytes)

Type: Modify -- Optional

Valid values: (-600) - (-400)

aturconfmaxnompsdus

<aturconfmaxnompsdus-val>

This parameter specifies the maximum nominal transmit

PSD(MAXNOMPSD) level during initialization and showtime. Value

depends on CO MIB element settings and near end transmitter

capabilities and is exchanged in the G.994.1 Phase. It is available only

for ADSL2/ADSL2plus. Value ranges from -60 to -38 in steps of 0.1

dBm/Hz.(length = 4 bytes)

Type: Modify -- Optional

Valid values: (-600) - (-380)

atucconfmaxnomatpds

<atucconfmaxnomatpds-val>

This parameter specifies the maximum nominal aggregate transmit

power(MAXNOMATP) level during initialization and showtime. Value

depends on CO MIB element settings and local capabilities and is

exchanged in the G.994.1 Phase. It is available only for

ADSL2/ADSL2plus. Value ranges from 0 to 25.5 in steps of 0.1

dBm.(length = 4 bytes)

Type: Modify -- Optional

Valid values: 0 - 255

aturconfmaxnomatpus

<aturconfmaxnomatpus-val>

This parameter specifies the maximum nominal aggregate transmit

power(MAXNOMATP) level during initialization and showtime. Value

depends on CO MIB element settings and local capabilities and is

exchanged in the G.994.1 Phase. It is available only for

ADSL2/ADSL2plus. Value ranges from 0 to 25.5 in steps of 0.1

dBm.(length = 4 bytes)

Type: Modify -- Optional

Valid values: 0 - 255

atucconfpsdmaskds

This configuration parameter defines that the downstream PSD mask

1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 706 707

Planet-technology IP DSLAM IDL-4801 Manual de usuario Pagina 291

Comentarios a estos manuales

Planet-technology IP DSLAM IDL-4801 Manual de usuario Pagina 291

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Planet-technology IP DSLAM IDL-4801