Planet-technology IP DSLAM IDL-4801 Manual de usuario Pagina 479

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 707
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 478
IP DSLAM
479
Parameters:
Name Description
ifname
<interface-name>
The IPOE Tunneling Interface.
Type: Create Mandatory
Delete Mandatory
Modify Mandatory
Get Optional
Valid values: 0-575
lowif <lowif-val>
This specifies the lower interface index.It contains the ifindex
of the IPoA interface.
Type: Create Mandatory
Valid values: 0 575
macaddrprof
macaddrprof
Profile Id corresponding to the MAC address assigned to this
IPOE interface. This Profile is created using the
MacAddrProfileTable.
Type: Create Mandatory
Modify Optional
Valid values: 1 -8
ethpkttype Type2 |
802_3
This specifies the type of the Packet.
Type: Create Optional
Modify Optional
Default value: Type2
inactivitytmrintrvl
inactivitytmrintrvl
This field specifies the time (in seconds) after which
interfaces shall be marked inactive, if there is no data activity
on this interface during this interval. This is used only when
the bit corresponding to "ConfigEntry" is set for
gsvIpoeConfigStatus field. A value of zero means the timer is
not running. In autosensing scenario, an inactive interface is
a candidate to deletion, if another protocol is sensed on Atm
Vc Interface on which this interface is created
Type: Create Optional
Modify Optional
Valid values: 0- 0xffffffff
Default value: 0
routingstatus enable
|disable
This specifies if the IP Routing Lookup has to be done for this
interface. By default, for the downstream traffic destined for
IPOE interface, IP lookup is done based on the downstream
route configured for the IPOE interface.If iproutingstatus is
disabled, layer 2 lookup shall be used instead, for forwarding
the downstream traffic for this IPOE interface.
Vista de pagina 478
1 2 ... 474 475 476 477 478 479 480 481 482 483 484 ... 706 707

Comentarios a estos manuales

Sin comentarios